View Full Version : Serpentine Belt
Duncan
25-06-2009, 12:36 PM
Hi
Can anyone give me a few tips on fitting a new serpentine belt.
Is it really as simple and pulling the tensioner back using a 3/8 drive, taking old belt off and putting new on.
Does the tensioner need slackening before pulling back
Any help would be appreciated
Many thanks
Duncan
lowey260
25-06-2009, 04:35 PM
Duncan,
Thought you sold your 260?
Anyway when I changed mine it was as simple as you suggested just pulling the tensioner back. Might be worth drawing yourself a little diagram showing you which way the belt runs before you take the old one off.
That beats the hell out of the V6 ZT....:D...just think of all that petrol £550 would buy...at least a week's worth!:)
SteveChilds
30-06-2009, 10:25 PM
Nick fitted the new belt to mine in about 5 mins! Pull the tensioner back and take it off, do the same and put it back on.. that simple really.
Herman
01-07-2009, 11:23 AM
Belt diagram, gracefully borrowed from 'MustangForum'
588
Original post here (http://mustangforums.com/forum/5045538-post10.html)
AndyG
01-07-2009, 05:30 PM
Just to show the Supercharger belt route:
Belt diagram, gracefully borrowed from 'MustangForum'
588
Original post here (http://mustangforums.com/forum/5045538-post10.html)
Is that a 4V diagram?
Herman
01-07-2009, 06:29 PM
Hope not, should be from the 2V....unless I've been asleep:z
edit: 2003 GT is a 2V as I recall
black olive
25-07-2009, 10:19 PM
nice one guys- going away on hols, and have chucked the spare belt in the boot just in case- good to know it can be done at the roadside if need be
spartacus
31-01-2011, 01:50 PM
What is pulley wheel 6 on the diagram above? Mine has just burned through my serpentine belt and I am stuck at Watford Gap services. Anything i can tell the AA when they arrive woule be handy...
Worst scenario !!!! Aircon compressor pulley is #6.Was aircon on??? If so could be compressor seized.If off then pulley bearing suspect!!!
As SVR has said it is the A/C compressor.
I carry a spare serpentine belt and also a A/C compressor delete idler wheel.http://www.jegs.com/i/Ford-Racing/397/M-19216-D46/10002/-1?parentProductId=
This is a free spinning wheel that you bolt on in place of the compressor. you then put the new serpentine belt on and you are mobile again.
If you need to use your car while you are waiting for a new compressor, you are welcome to borrow it.
SJR
spartacus
31-01-2011, 04:12 PM
Thanks chaps. Pulley bearing has gone - awaiting truck to take us home, as we have been for 2 hours now...
AndyG
31-01-2011, 06:27 PM
A/C compressor delete idler wheel.http://www.jegs.com/i/Ford-Racing/397/M-19216-D46/10002/-1?parentProductId=
Link to specific thread on here:
https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=7952
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.